Sale!
 

Coil Master DIY Coil Building Kit V3 – Canada

$69.99 $68.87

Coil Master DIY Coil Building V3 Kit – Canada

Priced in Canadian dollars (CDN)

Finally, a kit has arrived that is truly the Ultimate Builders Dream!  The new Coil Master DIY Building Kit V3 is updated with the new Coil Master 521 Tab Mini, allowing a complete build base for any atomizer. The 521 Tab Mini also allows you to fire the coils on the Tab, all while operating as an extremely accurate Ohm Reader. The 521 Tab Mini is a must have for builders of any expertise level.

The DIY Coil Building Kit includes the extremely useful Coil Master Coiling Kit V4, the newest and perfected coiling jig, that makes spining up your reshly built coils a breeze! The Coiling Kit V4 features a longer pole for easier coil alignment.  Now you can coil in two directions, clockwise or anti-clockwise.  Included in Black. 

The Coil Master DIY Coil Building V3 Kit also includes all the Pliers and Tweezers that a Builder would ever use! For Installing and setting coils, you have a set of both Needle Nose Pliers, and Angle Snips, for a clean and effortless Install. For working in coils, and wicking, you have your Ceramic Tweezers and The Fine Tipped Elbow Tweezers, with 3 Organic Cotton Pads which as we’ve found, will be your best friend, and a must have for a clean finish on your installs. The Updated Pen-Styled Screw Drivers combined with the Triple Allen Key tool cover all bases when clamping, and tightening your coils into the post holes. Rounding off this Fully Loaded Kit, we have the Folding Stainless Steel Scissors, which are tied with the Ceramic Tweezers as the most used tool in the Kit at the Vapevine Brick and Mortar shop, however all tools included in the kit are used daily. The Coil Master DIY Coil Building V3 Kit is truly all a builder needs in terms of Building and Maintaining Rebuildable Atomizers, and has become an Essential part of our Shop, that we cannot live without!

Coil Master DIY Coil Building Kit V3 Review Video

This Genuine CoilMaster DIY Coil Building V3 Kit includes:

  • 1x – Diagonal pliers
  • 1x – Needle-nose pliers
  • 1x – Stainless steel folding scissors
  • 1x – Pen-styled Phillips screwdriver
  • 1x – Pen-styled Flathead screwdriver
  • 1x – Ceramic Tweezer (T1)
  • 1x – Metal Elbow Tweezer (T3)
  • 1x – 10 ft 24 GA Kanthal A1 Wire
  • 1x – 521 Mini Tab
  • 1x – Coil Wrapping Kit V4
  • 1x – Silicon rubber case for jigs
  • 1x – T styled HEX screwdriver (1.25mm, 1.5mm, 2.0mm)
  • 3x – Japanese Organic Cotton Pads
  • 1x – Kevlar Carrying Case and Foam Organizer Insert

Description

Canadian Product Specifications:

The Coil Master DIY Coil Building Kit V3 Kit Comes with:

1 x Diagonal pliers
1 x Needle-nose pliers
1 x Stainless steel folding scissors
1 x Pen-styled Phillips screwdriver
1 x Pen-styled Flathead screwdriver
1 x Ceramic Tweezer (T1)
1 x Metal Elbow Tweezer (T3)
1 x 10 ft 24 GA Kanthal A1 Wire
1 x 521 Mini Tab1 x Diagonal pliers
1 x Needle-nose pliers
1 x Stainless steel folding scissors
1 x Pen-styled Phillips screwdriver
1 x Pen-styled Flathead screwdriver
1 x Ceramic Tweezer (T1)
1 x Metal Elbow Tweezer (T3)
1 x 10 ft 24 GA Kanthal A1 Wire
1 x 521 Mini Tab
1 x Coil Wrapping Kit V4
1 x Silicon rubber case for jigs
1 x T styled HEX screwdriver (1.25mm, 1.5mm, 2.0mm)
3 x Japanese Organic Cotton Pads
1 x Coil Wrapping Kit V4
1 x Silicon rubber case for jigs
1 x T styled HEX screwdriver (1.25mm, 1.5mm, 2.0mm)
3 x Japanese Organic Cotton Pads

 

Additional information

Color

Reviews

There are no reviews yet.

Be the first to review “Coil Master DIY Coil Building Kit V3 – Canada”

Your email address will not be published. Required fields are marked *

Have a Question? Submit it here!

*
*

*